Post your micro/ultra micro plans here you would like to share. Mon, 11 May 2026 18:37:45 +0000 Mon, 11 May 2026 18:37:45 +0000 PhlatForum http://www.phlatforum.com/xenforo/forums/micros/ Mon, 13 Jul 2015 12:04:02 +0000 http://www.phlatforum.com/xenforo/threads/micro-magnum.2751/ http://www.phlatforum.com/xenforo/threads/micro-magnum.2751/ invalid@example.com (blindflight) blindflight Specs: wing span: 15 1/8 "
weight: 1.4 oz.
controller: ultra micro receiver/ESC and servos
battery: 1S / 160mAh Lipo 30C/ 3.7V
Geared motor: 8.5 coreless brushed motor & 130mm x 70mm prop
Foam: 3mm Depron
Fabricated: MK3
Hope you like it... Attached files ...

Micro Magnum]]> 3 Mon, 10 Mar 2014 02:21:28 +0000 http://www.phlatforum.com/xenforo/threads/crazy-yak.3284/ http://www.phlatforum.com/xenforo/threads/crazy-yak.3284/ invalid@example.com (drankin) drankin View attachment 525 View attachment 526 View attachment 527 View attachment 528 View attachment 525 View attachment 527 [/ATTACH]]]> 4 Wed, 05 Mar 2014 20:56:10 +0000 http://www.phlatforum.com/xenforo/threads/replacement-airframe-for-the-umx-as3xtra-by-3drankin.3277/ http://www.phlatforum.com/xenforo/threads/replacement-airframe-for-the-umx-as3xtra-by-3drankin.3277/ invalid@example.com (drankin) drankin View attachment 508]]> 4 Sat, 19 Oct 2013 15:54:25 +0000 http://www.phlatforum.com/xenforo/threads/micro-phlat-glider.1774/ http://www.phlatforum.com/xenforo/threads/micro-phlat-glider.1774/ invalid@example.com (kram242) kram242 viewtopic.php?f=34&t=1758&start=0

This one uses a 1/16" bit and 15x39 3mm depron foam
I have the feed set at 80ipm for good results and it takes about 15 min to cut
There are 3 Micro PhlatGliders and 1 stand per sheet.
On the test versions we used 3 pennies for weight but could not get them all the way to the front of the nose so we added a...

Micro Phlat Glider]]> 7 Mon, 09 Apr 2012 03:30:53 +0000 http://www.phlatforum.com/xenforo/threads/micro-phlat-wing.2784/ http://www.phlatforum.com/xenforo/threads/micro-phlat-wing.2784/ invalid@example.com (kram242) kram242
Here is the PhlatWING design we did for EvilTunez B-Day Fly In!
As of now this is an untested design and there are a few tweaks that could be done for a better fit.
This will give your Phlatprinters a workout
I used the 1/16th bit diamond cut bur bit from the bit kit (more aggressive cutting teeth then the dremel 1/16th bit) If the dremel 1/16th bit is all you have you may have to slow the feed rate a little so that you don't push the foam.
1.2 mm carbon was used.
We...

Micro Phlat WING]]> 27 Thu, 06 Oct 2011 15:20:02 +0000 http://www.phlatforum.com/xenforo/threads/micro-tiburon-bipe.2041/ http://www.phlatforum.com/xenforo/threads/micro-tiburon-bipe.2041/ invalid@example.com (ewo) ewo View attachment 288 View attachment 289 View attachment 287
This is the Micro Tiburon Bipe origanally designed by Matt Putman
Microized by me

after cutting the file i found a few of the tabs dont line up with there slots...... so im rechecking and reworking the files. I will post when the files are fixed

I cut it with my Rotozip ....... looks almost like it was Laser cut

Im glad i didnt go along with the crowd and cut my pulleys off...

Micro Tiburon Bipe]]> 15 Thu, 08 Sep 2011 17:13:19 +0000 http://www.phlatforum.com/xenforo/threads/introducing-the-morback-x-tra.2439/ http://www.phlatforum.com/xenforo/threads/introducing-the-morback-x-tra.2439/ invalid@example.com (ewo) ewo It fly's very well with parts from the UMX- Beast. Thats why we call it X-Tra

At 17" and an AUW of 1oz with 4-Site gear to 1.50 with Umx gear Its a blast ,although it will eat up some room if not throttle managed well. It hangs on the prop with little control input
Design is of French origin. Designer is a fellow called X-Tazi ,The man is a Genious..

I will edit this post to include pictures and video . As well as the...

Introducing the Morback X-Tra]]> 3 Mon, 11 Apr 2011 15:11:48 +0000 http://www.phlatforum.com/xenforo/threads/sketchup-micro-parts.1770/ http://www.phlatforum.com/xenforo/threads/sketchup-micro-parts.1770/ invalid@example.com (ToxicToast) ToxicToast [list type=decimal][*]Hobby City 18-11 2000kv 10gr
Hobby City C1818 Micro Brushless Outrunner 3500kv 9gr
4.7gr servos
3.7gr servos
Radical RC Biased Control Horn
GWS Generic Prop (I didnt make this, not sure who original author is)
Rhino 2S 360[/list type=decimal]


Attached files...

Sketchup Micro Parts]]> 5 Thu, 28 Oct 2010 17:33:57 +0000 http://www.phlatforum.com/xenforo/threads/the-micro-illusion-is-here.1562/ http://www.phlatforum.com/xenforo/threads/the-micro-illusion-is-here.1562/ invalid@example.com (ewo) ewo 59