1. Hey guyz. Welcome to the All New Phlatforum!



    Sign Up and take a look around. There are so many awesome new features.

    The Phlatforum is a place we can all hang out and

    have fun sharing our RC adventures!

  2. Dismiss Notice

Mini PC-6 Porter

Discussion in '* Scratch Built Section *' started by dhc8guru, Dec 14, 2011.

  1. dhc8guru

    dhc8guru Member

    Offline
    Messages:
    237
    Trophy Points:
    16
    Location:
    San Antonio
    I needed another indoor plane so I whipped this up. A day to model and write the G-code, 10 minutes to cut (gotta love the PP3!) and an evening to build. It tuned out to be a nice flyer. Being a 3 channel plane, its good at tooling around in circles and making cool slow flyby's. All I really wanted it to do.
    It would make a nice plane for someone leaning to fly because I designed it pretty stout.

    28" WS and 5 oz flying weight.

    Attached files [​IMG]
     
  2. dhc8guru

    dhc8guru Member

    Offline
    Messages:
    237
    Trophy Points:
    16
    Location:
    San Antonio
    I do have g-code for this plane if anyone wants to build one. Just PM me. Its all 6 mm depron. You could probably get fan fold to work, just may need to do a little sanding on the tab and slot areas.
     
  3. kram242

    kram242 Administrator Staff Member

    Offline
    Messages:
    6,311
    Trophy Points:
    13
    Location:
    NJ
    This would be a good one for the free plans single wingers, If you would like to share it there :)
    Mark and Trish
     
  4. rcav8r

    rcav8r Moderator Staff Member

    Offline
    Messages:
    1,193
    Trophy Points:
    38
    NEat little plane... turns rather well for no ailerons, and no real apparent dihedreal.
     
  5. dhc8guru

    dhc8guru Member

    Offline
    Messages:
    237
    Trophy Points:
    16
    Location:
    San Antonio
    I have the g-code. I will email it to you Mark for posting. :p
     

Share This Page