When i bye the MK2 Kit vor International Shipping, what Parts i need to complete the Printer??? The Motors must i bye seperatly, and what parts i need too??

Thanks for Infos Alexander Hau

Sorry for my English im German

 

Hi Alexander,

I've pm Mark & Trish, since it's easy to miss your post. So you can expect an answer from them later today.

But until then, there is some info on the bottom of this page you can look at:
http://phlatstore.mybisi.com/product/0/ ... 88169.html

"What's not included: the electronics (3 stepper motors, driver board, parallel cable, and power supply), the Rotozip, the Rotozip Flex Shaft and the glue."

I assume you need a power strip, also. That is normally included, but I assume because of power plug differences will be left out of international orders?

-Kwok Attached files

 

Where can i bye the Rotozip and Rotozip Flex shaft for me, when its not included???
Work the Steppermotorr and the Driverboard with the 230Volts from germany??? Im very intrestet on the Printer when the half is missing it's pretty expensive. I must the printer pay in the three month, when it comes more Parts seperatly is it very expensive. :| :|

I hope i'am not the only one from Germany to bye the Printer.

Thanks for Infos. I have to let me go through my head again.

Bye bye sorry for my english.

PS. Translatet with Google. Attached files

 

Sorry for question is the RotoZip the Dremel??? When it is, thats no Problem to bye it.
Works the CNC-Kit in German with the 220 Volts???

 

The rotozip is a rotory tool, like the dremel, but bigger and more powerful. The US model rotozip is 5 amp, while the dremel is probably only 1 amp.

"Work the Steppermotorr and the Driverboard with the 230Volts from germany???"
When you buy the electronics, just make sure the power supply works with your country's voltage. For example, the power supply from easy-cnc excepts 100-240V. So that would work fine, for Germany.

Check here to find where you can buy the rotozip, in Germany: http://www.rotozip.com/
specifically: http://www.rotozipeurope.com/rotozip/de ... country=DE
I think rotozip brand is by Bosch. We use the RZ1 model: http://www.rotozip.com/Shop/ProductDetail.htm?IID=RZ01 and the flex shaft: http://www.rotozip.com/Shop/CategorySub ... D=18?HID=6

Maybe, only the RZ3 model is available in Germany?

-Kwok

 

Ok thanks, with the Rotozip have i think its a driveshaft or driveweehl.

Are all the screws here, because of different American to German.Not that I saw him with our tool can not build together.

Questions about questions.
Come before me stupid.

I find for Germany the RZ3.

 

HSV_Freak, welcome to the forum and a big 'Hummel, Hummel'

 

LOL Hummel Hummel

Very nice thanks for the Welcome.

 

"Ok thanks, with the Rotozip have i think its a driveshaft or driveweehl."
???? The flex shaft is a drive shaft. And mounted to the Y Axis Gantry. They are using it because it is much lighter: download/file.php?id=2652&mode=view download/file.php?id=2765&mode=view The rotozip sit outside, behind the MK2. You can see where the flex shaft attached to the rotozip, here. That box in the center: download/file.php?id=2337&mode=view

Check out some of the MK2 build logs, if you haven't already: viewforum.php?f=135

"Are all the screws here, because of different American to German.Not that I saw him with our tool can not build together."
Yes, everything else is included; all the screws & hardware.

You know the stand is not included, correct? Not even available, for international customers. Shipping is just too expensive.

-Kwok

 

ok my questions are clearly. The payment i speak with Mark and trish. I will this printer **g**