Hello all !

Man this is one pretty airplane ! Designed by Jerry Combs , the plans were drawn by Howard Carpenter.
Microized ,then Phlat scripted and milled by ME.

You will notice the horizontal stab didnt get cut on the sheet. Thats because i thougtht the file was done cutting and the machine was heading home...... It was not !
So i made a stab file and cut it out of scrap. Day was saved. :mrgreen:

I wont take the foam out too soon anymore !

OH and i will be painting this one ! :geek: Attached files

 

Well after cutting the parts from the sheet then dry fitting, I found a few things wrong

My slots were too tight for the tabs, also i had the side stiffeners a tad too low for the 4 Site motor mount.

all the things i didn't like have been fixed this morning and i will be cutting the new file tonight.
Including some new tid bits

SO-Stay tuned ! :geek:

 

This is a picture of our friend and Brother Jerry Combs with his origanal micro Ballerina.
I hope he don't mind i share this picture ! Attached files

 

Wow!! That is awesome ewo. Let us know how you make out!

 

I cut a new one today as it was way too windy and cold to fly .
Here are the cutout pictures as well as the trial fit.
Not too bad but i did have to do a little x-acto work to get the tabs to fit the rounded slots
Go figure.

The paint will be Jerry's fade. Red to yellow Attached files

 

Just wanted to show a little something with some color .
The Ballerina graphics were made by firetrappe .Borrowed by me !

Im almost done except for some minor highlighting around the edges and a small graphic on the rudder. Attached files

 

Whoa! That turned out great Bruce! How are they flying now?
Nice Job
Mark and Trish

 

Thanks guys.

It is airbrushed Dennis. I am finishing the paint this morning and starting on the last of the
planes i had to paint. Then i install the goodies.

 

Looks awesome, ewo!

Jerry recovering well?