Hi
I am having a problem with these part:

First the phlatscript get confused from the start: I have to press shift all the time with the outside tool and inside tools to get it right). It's like it reads everything inverted.

Then the 2 rows of longitudinal slots "inside cuts" (the thin one, most inner) are 3.6 mm on the sketch, but when they are cut, they are 2.5mm strange when all the other dimension appear right...
the outside end cuts of this row of slots, and the width slots are fine... I just don't get it.


Can someone take a look if I do something wrong? I am thinking there's a bug somewhere, but I could be wrong.

I included the part and the gcode Attached files v3_Parts.rar (89.7 KB)Â

 

Not sure how you created this but all the faces appear to be reversed.

Select all and using the eraser tool, erase all of your cut lines. Select all again and do a reverse face.

Then reapply your outside and inside cuts. Seems to work for me when I do it this way.