Hi Chuck,

Cool....the great thing about the PhlatPrinter is you can always throw more foam in and get a brand new plane....

Matthew

 

Very true Matthew, and I'm lovin' it!

Chuck

 

Chuck, The pink foam is a little thicker than the blue ff . Sanding the tabs a little is all it needs.

Jeff

 

What is the recommended motor setup for this plane. I have a park 370, a 400, a power 15 a rimfire 4500 and a chineese emax 2812. I have the rimfire mounted on it but the prop area is only about 6 inches, the motor calls for at leas an 8.

50/50

 

i run a 2212-06 outrunner with a 6*4 prop.

 

I am looking and Grayson hobbies has those w/esc for 40.00 bucks, is that the best place to get them?

 

crash5050, that looks like a pretty good price and I've gotten great service from Grayson.

 

then it will be done, as long as I am asking,,,,,will that motor fly pretty much everything on here? I need to get me a stash, and of course miss out on all those shipping charges.

 

I ordered two of the combo kits from them, meantime I am going to bust out the rimfire, it has 1299 kv i think.

 

Is any 1 could make a .skp from the plans of rcfoamfighters ? You can download the plans from there website for free. Thanks.

Attached files FF-22%20Rev1-2 A faire.pdf (1.4 MB)Â

 

I'll do it in Illustrator and export it in dwg in SketchUp. I saw that is possible.

In few days

I build this plane by hand and I'm loving so much that a want to buy a Phlatprinter

 

I wonder if anybody would be so kind as to take some pictures of thier raptor as far as electronics placement go, ie servos, motor mounting, etc?

5050