1. Hey guyz. Welcome to the All New Phlatforum!



    Sign Up and take a look around. There are so many awesome new features.

    The Phlatforum is a place we can all hang out and

    have fun sharing our RC adventures!

  2. Dismiss Notice
Welcome to The Phlatforum PhlatPrinter III

Validity Check

Discussion in 'SketchUcam Help' started by travisc, Feb 28, 2009.

  1. travisc

    travisc Member

    Offline
    Messages:
    138
    Trophy Points:
    16
    Location:
    Louisville KY
    I am not sure where to ask this question , but I feel it has something to do with the phlatscript.
    In Sketchup 7 when I import or draw some stuff sometimes the edges of objects are no longer black,
    but have a gray or light color. When I go to Model Info than to Staticstics click on Fix Problems, I get this:
    Results of Validity Check.
    The edge color mode for CRenderingOptions (11) is not valid - fixed

    The reason I feel it has to do with the script, it started to happen after I installed the script.
    Rember with the old version of the script you had to save the file and open it back up to see the colors of the toolpath lines.

    I use sketchup at work, and this problem just bugs me to death, has anyone seen this error, and how to fix it.

    Travis
     
    travisc, Feb 28, 2009
    #1
  2. Thewz

    Thewz Moderator

    Offline
    Messages:
    269
    Trophy Points:
    0
    Location:
    Temecula, CA
    I've seen it too with ver 7 but I had it before I installed the script. I even get weird geometry that suddenly appears..... :shock:
     
    Thewz, Feb 28, 2009
    #2
  3. Anonymous

    Anonymous New Member

    Offline
    Messages:
    1,280
    Trophy Points:
    0
    I haven't seen anything goofy like that, and I have the latest updates and plugins.
     
    Anonymous, Feb 28, 2009
    #3
  4. Flashsolutions

    Flashsolutions Active Member

    Offline
    Messages:
    1,123
    Trophy Points:
    38
    Location:
    Leesburg, Florida
    I have seen something similar. Not sure if it is the same. My black lines turn to dotted lines and sometimes, it gets into a situation where you cannot select anything. At that point, saving the file results is a crash and you loose all your work.


     
    Flashsolutions, Feb 28, 2009
    #4
  5. Thewz

    Thewz Moderator

    Offline
    Messages:
    269
    Trophy Points:
    0
    Location:
    Temecula, CA
    I figure that the software is free so I can't complain too much....I just save a lot.
     
    Thewz, Feb 28, 2009
    #5
  6. 3DMON

    3DMON Moderator Staff Member

    Offline
    Messages:
    2,380
    Trophy Points:
    38
    Location:
    Sebastian, Florida
    If you ever do lose all your work you can open the .skb file. It retains the majority of your work as abackup file. I had to do this once with SU 6.
     
    3DMON, Feb 28, 2009
    #6
  7. Flashsolutions

    Flashsolutions Active Member

    Offline
    Messages:
    1,123
    Trophy Points:
    38
    Location:
    Leesburg, Florida
    I didn't know that. Thanks for the tip 3DMON!
     
    Flashsolutions, Mar 1, 2009
    #7
  8. TigerPilot

    TigerPilot Well-Known Member

    Offline
    Messages:
    1,578
    Trophy Points:
    48
    I have it set to 'auto back up' every three minutes.

    Yoram
     
    TigerPilot, Mar 1, 2009
    #8
  9. 7up

    7up Moderator Staff Member

    Offline
    Messages:
    1,090
    Trophy Points:
    38
    Location:
    Kentucky
    I have this prob from time to time. Although not a permanent fix this does seem to correct the problem for the current session that I am working on...

    Go to "Window", "Styles" select "Edit" tab and select the "Edge" icon, the first one in the row of icons, then at the bottom of the dialog window where it says "All same" hit the drop down box and select "All same" again and hit "Enter" on the keyboard to close the dialog box.

    It doesn't take as long as it sounds once you've done a couple times.

    There should be somewhere to set this to default but I really haven't looked yet.

    Hope this helps.

    -Buk
     
    7up, Mar 1, 2009
    #9
  10. travisc

    travisc Member

    Offline
    Messages:
    138
    Trophy Points:
    16
    Location:
    Louisville KY
    Thanks,
    I was not sure if it was a phlatscript proplem.
    I'll try what everyone has said.
    7up where in Kentucky are you? I am in Louisville.
     
    travisc, Mar 1, 2009
    #10
  11. 7up

    7up Moderator Staff Member

    Offline
    Messages:
    1,090
    Trophy Points:
    38
    Location:
    Kentucky
    West Liberty, Morgan County. 75 miles east of Lexington.
     
    7up, Mar 2, 2009
    #11

Share This Page